Subfloor & Deck
LN-902 VOC Subfloor Adhesive 10 oz, 2 Pack
2 x 10 oz cartridges
$9.36
★★★★☆ 4.2 out of 5 · 138 ratings
Two 10 oz LN-902 cartridges, the low-solvent subfloor adhesive recommended for wet, frozen, engineered and treated lumber, OSB, plywood, particleboard and wafer board. Instant holding power, interior and exterior, APA AFG-01 compliant, and enough bead for a deck repair and a squeaky hallway.
BondsWet, frozen, engineered and treated lumber, OSB, plywood, particleboard and wafer board, subfloors, decks and sheathing, interior and exterior.
Price and stock are shown on the partner store page that opens from the button.
Guns at 20 degrees F
Wet & frozen lumber
Stops floor squeaks
Bridges gaps
- Two 10 oz LN-902 cartridges
- Bonds engineered, treated, wet and frozen lumber
- Plywood, OSB, particleboard and wafer board panels
- Instant holding power, interior and exterior
- Meets APA AFG-01; VOC compliant
Reaches for it
Deck and porch repairsHallway squeaksShed and barn floorsStair rebuilds
- Brush debris, snow and ice off the joists; the adhesive bonds to wet and frozen lumber.
- Cut the tip for a 1/4 in. bead and puncture the seal.
- Run a continuous bead down the center of each joist, two beads where panel ends meet.
- Lay the panel within the working time and fasten immediately per the panel schedule.
- Keep traffic off 24 hours; full cure 7 days.
Not recommended for mirrors, ceramics or non-porous plastics.
| Size | 10 oz cartridge, 2 pack |
|---|---|
| Color | Tan |
| Specification | APA AFG-01 |
| Coverage | About 62 linear ft of joist |
| Base | Solvent-based subfloor construction adhesive |
| Application temperature | 20 to 100 degrees F |
| Specification | Meets APA AFG-01 |
| Coverage | About 80 linear ft of joist per 28 oz |
| Service | Interior and exterior |
| Color | Tan |
Two tubes for the squeaks you can reach. Orders, delivery and returns run through the order page of the partner store.
Questions about this tube
Is two 10 oz tubes the same as one 28 oz?
Less bead (20 oz vs 28), but it fits the standard gun most homeowners own.
Can I use it under hardwood flooring?
Use it to bond the subfloor to joists; the flooring on top goes down with the flooring maker's adhesive or fasteners.
Same shelf
See the lineRecommended products
Subfloor & Deck
Subfloor & Deck 10 oz Tan Solvent-Based Adhesive
10 oz cartridge
$9.99$12.88★★★★☆ 4.0 (28)
Subfloor & Deck
LN-902 Subfloor & Deck Adhesive, Low VOC, 28 oz
28 oz cartridge
$5.53★★★★☆ 4.2 (138)
$9.36