Heavy Duty & Extreme
Heavy Duty LN-903 10 oz + Lightweight Spackling Bundle
10 oz cartridge + 1/2 pint spackling
$9.68
★★★★☆ 4.5 out of 5 · 2 ratings
Heavy Duty construction adhesive paired with a half pint of lightweight spackling, the two things a wall repair actually needs: a bead that bonds the loose panel, cement backer or trim, and a filler that hides the nail holes without shrinking or sanding. The adhesive bridges gaps and gives 10 minutes of working time; the spackling is paintable in minutes.
BondsPlywood, OSB, particleboard, drywall, tile board, foam board, treated lumber, brick veneer (interior), concrete, wood and most common building materials, interior and exterior.
Price and stock are shown on the partner store page that opens from the button.
Interior & exterior
Fills 3/8 in. gaps
Holds heavy materials
GREENGUARD Gold
- Liquid Nails Heavy Duty LN-903 10 oz cartridge
- Bonds the heaviest materials, including plywood and cement backer board
- Bridges gaps, 10 minutes working time, flexible, impact-resistant bond
- Lightweight spackling spreads in one application without shrinking or cracking
- No sanding required; paintable in minutes
Reaches for it
Drywall and trim repairLoose panel fixesRental turnoversMove-in punch lists
- Surfaces clean, dry and above 40 degrees F; wipe off sawdust and loose paint.
- Cut the nozzle at 45 degrees for a 1/4 in. bead, puncture the seal, load the gun.
- Run a zigzag bead on one surface, 2 to 3 in. apart, or a continuous bead on trim and framing.
- Press the pieces together within 10 minutes and slide slightly to seat the bead.
- Brace or fasten for 24 hours. Full cure up to 7 days; longer in cold or between non-porous materials.
Not recommended for flooring, ceramics, mirrors, granite, marble, plastic, vinyl, underlayment or installing tile board directly to studs.
| Contents | LN-903 10 oz + 1/2 pint lightweight spackling |
|---|---|
| Adhesive color | Tan |
| Working time | About 10 minutes |
| Service | Interior and exterior (adhesive) |
| Base | Low-solvent synthetic rubber, high strength |
| Working time | About 10 minutes |
| Gap fill | Up to 3/8 in. |
| Application temperature | 40 to 100 degrees F |
| Service | Interior and exterior, waterproof after cure |
| Certification | GREENGUARD Gold (UL Environment), low VOC |
Adhesive plus filler for a one-trip wall repair. Orders, delivery and returns run through the order page of the partner store.
Questions about this tube
Is the spackling a Liquid Nails product?
No, it is a lightweight spackling that this listing packs together with our Heavy Duty cartridge; the adhesive is the LN-903 you know.
Can the spackling fill the adhesive squeeze-out?
Trim the cured bead first, then spackle over the joint before paint.
Same shelf
See the lineRecommended products
Heavy Duty & Extreme
LN-901 Heavy Duty Construction Adhesive, 28 oz
28 oz cartridge
$6.48★★★★☆ 4.2 (158)
Heavy Duty & Extreme
Extreme Heavy Duty Construction Adhesive, 10 oz
10 oz cartridge
$4.48★★★★☆ 4.5 (4,762)
$9.68