Great adhesion!
Used it to install some 3D vinyl wall tiles and it worked great.


4 x 10 oz cartridges
★★★★★ 4.7 out of 5 · 227 ratings
Four cartridges of the tan Heavy Duty bead, enough to panel a basement room or sheath a shed. Each 10 oz tube runs about 31 feet of 1/4 in. bead and cures to a waterproof, impact-resistant bond on plywood, OSB, drywall, tile board, treated lumber and brick veneer.
Price and stock are shown on the partner store page that opens from the button.
Not recommended for flooring, ceramics, mirrors, granite, marble, plastic, vinyl, underlayment or installing tile board directly to studs.
| Size | 10 oz cartridge, 4 pack |
|---|---|
| Color | Tan |
| Coverage | About 31 ft per cartridge |
| Service | Interior and exterior |
| Base | Low-solvent synthetic rubber, high strength |
| Working time | About 10 minutes |
| Gap fill | Up to 3/8 in. |
| Application temperature | 40 to 100 degrees F |
| Service | Interior and exterior, waterproof after cure |
| Certification | GREENGUARD Gold (UL Environment), low VOC |
Used it to install some 3D vinyl wall tiles and it worked great.
I got this for my garage flooring install and it has worked just fine. Easy to use and holds well so far. Arrived fast and cheaper than driving for an hour to the store to buy in person.
About four, with a zigzag bead 3 in. apart on 4 by 8 sheets; this pack covers it.
Yes, if the garage stays above 40 degrees F; a frozen cartridge may not gun smoothly.
28 oz cartridge
10 oz cartridge