★★★★★
Holds tenaciously
Holds like no other construction adhesive out there. Good luck taking the project apart after it sets!
Matthew Payne · October 13, 2023
Heavy Duty & Extreme
Heavy Duty 28 oz Tan Solvent-Based Adhesive, 12 Pack
12 x 28 oz cartridges
$84.00
★★★★☆ 4.2 out of 5 · 158 ratings
The solvent-based quart cartridge by the case: twelve 28 oz tubes, each running 88 linear feet of 1/4 in. bead, engineered for the heaviest materials from plywood and wafer board to cabinets, brick veneer and drywall, with a long-term, impact-resistant bond that bridges gaps to 3/8 in.
BondsThe heaviest building materials: plywood, wafer board, foam board, treated lumber, tile board, cabinets, brick veneer, drywall, concrete and wood, interior and exterior.
Price and stock are shown on the partner store page that opens from the button.
Heaviest materials
Bridges 3/8 in.
Interior & exterior
10 min working time
- Twelve 28 oz solvent-based cartridges
- Each quart cartridge lays about 88 ft of 1/4 in. bead
- Engineered to bond the heaviest materials
- Spans gaps of up to 3/8 in. between surfaces
- Solvent free, exceptional holding power
Reaches for it
Cold-season framingCabinet and countertop crewsMasonry veneerLarge sheathing jobs
- Clean and dry both surfaces; remove frost, grease and loose material.
- Cut the tip for a 1/4 in. bead and puncture the inner seal.
- Apply a continuous or serpentine bead to one surface; a 28 oz cartridge runs about 88 ft.
- Join within 10 minutes, press firmly, and adjust while the bead is wet.
- Fasten or brace for 24 hours; impact-resistant full strength in 7 days.
Not recommended for mirrors, ceramics, granite, marble, polyethylene, polypropylene or flooring.
| Size | 28 oz cartridge, 12 pack |
|---|---|
| Color | Tan |
| Coverage | About 1,050 ft per case |
| Gun | 28 oz caulk gun |
| Base | Solvent-free, high-strength construction adhesive |
| Working time | About 10 minutes |
| Gap fill | Up to 3/8 in. |
| Coverage | 88 linear ft of 1/4 in. bead per 28 oz; about 31 ft per 10 oz |
| Application temperature | 40 to 100 degrees F |
| Service | Interior and exterior |
Twelve quarts of solvent Heavy Duty. Orders, delivery and returns run through the order page of the partner store.
From the job site
What buyers wrote about this tube
★★★★★
The best heavy-duty construction adhesive
Highest strength of any constructions adhesive, superior weather resistance, and easy to use, what's not to like? Don't confuse this with regular-grade or low-VOC "heavy-duty", which are half the strength of this or even weaker. Not available in stores in my area, so stock up while you can. God help you if you need something stronger than this, because you're in serious trouble. Try 3M FC4000 UV Marine Adhesive/Sealant.
The Jolly Bodger · April 16, 2011
Questions about this tube
Why choose solvent 28 oz over latex 28 oz?
Cold weather, damp lumber and the heaviest materials favor the solvent formula; occupied interiors favor latex.
Does a case ship with the cartridges capped?
Yes, sealed cartridges in the factory case; keep them upright and above 40 degrees F.
Same shelf
See the lineRecommended products
Heavy Duty & Extreme
LN-901 Heavy Duty Construction Adhesive, 28 oz
28 oz cartridge
$6.48★★★★☆ 4.2 (158)
Heavy Duty & Extreme
Extreme Heavy Duty Construction Adhesive, 10 oz
10 oz cartridge
$4.48★★★★☆ 4.5 (4,762)
$84.00