Heavy Duty & Extreme
Heavy Duty 10 oz Tan Solvent-Based Adhesive, 12 Pack
12 x 10 oz cartridges
$44.03$48.00save 8%
★★★★☆ 4.2 out of 5 · 158 ratings
Twelve cartridges of the solvent-based Heavy Duty, the one engineered to bond the heaviest materials: plywood and wafer board, foam board, treated lumber, tile board, cabinets, brick veneer and drywall. Exceptional holding power with a long-term, impact-resistant bond, gap bridging to 3/8 in., and 88 linear feet of 1/4 in. bead per 28 oz equivalent.
BondsThe heaviest building materials: plywood, wafer board, foam board, treated lumber, tile board, cabinets, brick veneer, drywall, concrete and wood, interior and exterior.
Price and stock are shown on the partner store page that opens from the button.
Heaviest materials
Bridges 3/8 in.
Interior & exterior
10 min working time
- Twelve 10 oz cartridges, solvent-based Heavy Duty
- Engineered for the heaviest building materials
- Long-term, impact-resistant bond
- Gap-bridging bead up to 3/8 in.
- Rated for interior and exterior use
Reaches for it
Cold-weather framingCabinet installsBrick veneerHeavy panel work
- Clean and dry both surfaces; remove frost, grease and loose material.
- Cut the tip for a 1/4 in. bead and puncture the inner seal.
- Apply a continuous or serpentine bead to one surface; a 28 oz cartridge runs about 88 ft.
- Join within 10 minutes, press firmly, and adjust while the bead is wet.
- Fasten or brace for 24 hours; impact-resistant full strength in 7 days.
Not recommended for mirrors, ceramics, granite, marble, polyethylene, polypropylene or flooring.
| Size | 10 oz cartridge, 12 pack |
|---|---|
| Color | Tan |
| Base | Solvent-based |
| Cleanup | Mineral spirits while wet |
| Base | Solvent-free, high-strength construction adhesive |
| Working time | About 10 minutes |
| Gap fill | Up to 3/8 in. |
| Coverage | 88 linear ft of 1/4 in. bead per 28 oz; about 31 ft per 10 oz |
| Application temperature | 40 to 100 degrees F |
| Service | Interior and exterior |
The solvent bead, by the case. Orders, delivery and returns run through the order page of the partner store.
Questions about this tube
Solvent-based or latex for a cold garage?
Solvent-based. It guns better in cool temperatures and bonds slightly damp lumber.
How do I clean a solvent bead off my hands?
Mineral spirits while wet, then soap and water; cured adhesive rolls off with petroleum jelly in a day.
Same shelf
See the lineRecommended products
Heavy Duty & Extreme
LN-901 Heavy Duty Construction Adhesive, 28 oz
28 oz cartridge
$6.48★★★★☆ 4.2 (158)
Heavy Duty & Extreme
Extreme Heavy Duty Construction Adhesive, 10 oz
10 oz cartridge
$4.48★★★★☆ 4.5 (4,762)
$44.03