Since 1968Done once. Done right.Bonds you can trust
Projects, Paneling & Drywall
Latex Projects & Foamboard Adhesive 10 oz, 2 Pack
2 x 10 oz cartridges
$26.68
★★★★☆ 4.2 out of 5 · 52 ratings
Two cartridges of the foam-safe latex adhesive for insulating a basement wall or lining a workshop. Won't attack rigid polystyrene, bonds wood, drywall and panels, low odor, water cleanup, and no staining through thin panels.
BondsRigid polystyrene foam insulation, wood, drywall, panels and common interior building materials.
Price and stock are shown on the partner store page that opens from the button.
Foam safe
Low odor
Water cleanup
Won't stain
Two 10 oz Projects & Foamboard cartridges
Ideal for rigid polystyrene foam insulation
Bonds most interior building materials
Cleans up with water while wet and keeps the odor low
Won't stain finished surfaces
Reaches for it
Basement insulationGarage workshop wallsCraft and display boardsInterior panel repairs
Surfaces clean and dry, above 40 degrees F.
Cut the tip for a 1/4 in. bead.
Zigzag bead on the foam or the wall, 3 in. apart.
Press the panel in place within 20 minutes.
Brace or tape 24 hours. Water cleanup while wet.
Interior use only; not for mirrors, ceramics or exterior exposure.
Specifications
Size
10 oz cartridge, 2 pack
Color
Off-white
Base
SBR latex
Service
Interior
Base
SBR latex, low odor
Working time
About 20 minutes
Foam safe
Will not attack polystyrene
Service
Interior
Cleanup
Water while wet
Finish
Will not stain
A basement wall's worth of foam-safe bead. Orders, delivery and returns run through the order page of the partner store.
From the job site
What buyers wrote about this tube
★★★★★
Finally!! A product that works!
It takes awhile to dry, but I finally found a product I can use to glue stuff onto foam board!! I am a pastor’s wife + a designer 👉🏼 amateur artist… who usually gets put in charge of sets & decorations for VBS & other church events. This year I needed to glue furry blankets to foam insulation board to build a lion, but all the other adhesives melt that foam, & I was not going to sew this one. I did have to leave it to dry overnight, but it seems to be holding up well so far!!
Israel B. · June 8, 2024
★★★★★
Worked Great
Works Great! Bonded a rubber cover sheet to foam board and worked perfectly.
Taco Daddy · July 22, 2025
Questions about this tube
How many 2 by 8 foam panels per cartridge?
About four with a zigzag bead 3 in. apart.
Can I skim coat over it?
Yes, once cured the bead is paintable and takes joint compound at the seams.
